Requirements for placement of stainless steel high pressure reactor

The stainless steel autoclave/High pressure reactor shall be placed indoors during installation. In the process of multiple devices, they need to be placed separately. Each operating room in the stainless steel autoclave can directly
The outlet leading to the outdoor or passage shall ensure good ventilation of the equipment location.
Now let's understand the placement requirements of stainless steel autoclave.
The pot cover is installed in the stainless steel autoclave. The pot cover between concave and convex sealing surfaces shall be prevented during use. The lid on the pot body is carefully arranged according to the fixed position. It is effective to tighten the main nut diagonally.
When in use, the stress is uniform, and the cover is not allowed to tilt to one side to achieve good sealing effect. There are only two positive and negative connecting nuts, and the two round sealing surfaces can rotate relative. All
The nut connector assembly shall be coated with lubricating oil.
The kettle needle and thread are sealed by gently rotating the valve needle during use, effectively compressing its sealing cover to achieve a good sealing effect, and effectively using the hand disc of the rotating mechanism to execute the kettle
To check whether its operation is flexible.
Its control kettle shall be placed on the operating platform. The operating temperature of the unit is 10 to 40 degrees. The relative humidity of the product is less than 85%. Conductive dust and corrosive gas cannot be contained in the product
In the surrounding medium.
It needs to be checked effectively. If the panel and the movable parts and fixed contact points on the panel are normal, you can check whether the contact connecting the kettle is loose. Poor transportation and storage during operation may cause

Damage or rust.

For more detail ,please contact us ! thank you !