How to using the high pressure stainless steel reactor ?

Stainless steel high pressure reactor should be placed indoors during installation. In the process of installing multiple devices, they need to be placed separately. Each operating chamber in the stainless steel autoclave can be directly
The outlet leading to the outside or the channel ensures good ventilation of the equipment location.
Let's take a look at the placement requirements of stainless steel autoclave.
The lid is installed in a stainless steel autoclave. When in use, the lid should be prevented from being between the concave and convex sealing surfaces. The lid on the pot body is carefully arranged according to the fixed position. Tightening the main nut is effective to gradually tighten diagonally.
The stress is uniform during use, and the cover is not allowed to tilt to one side, which can achieve a good sealing effect. The positive and negative connection nuts have only two positive and negative nuts, and the two circular sealing surfaces can rotate relative to each other. all
The nut connector assembly should be lubricated.
The needle and thread of the kettle are sealed, and the valve needle only needs to be gently rotated during use to effectively compress the sealing cover, so that it can achieve a good sealing effect, and effectively use the hand plate of the rotating mechanism to execute the kettle
to check whether its operation is flexible.
Its control kettle should be placed on the operating platform. The unit has an operating temperature of 10 to 40 degrees. The relative humidity of the product is less than 85%. Conductive dust and corrosive gases cannot be contained in the product
in the surrounding medium.
It needs to be checked effectively. If the panel and the movable parts and fixed contact points on the panel are normal, you can check whether the contact connecting the kettle is loose. Poor transportation and storage during operation may cause
become damaged or rusted.