Titanium rod filter
The titanium rod filter has the characteristics of high pressure, strong acid, strong alkali, corrosion resistance, and the filter element can be regenerated repeatedly. It is suitable for liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries, and is especially suitable for decarbonization and filtration in large infusion and injection production lines in the pharmaceutical industry. This series of products has a compact structure and beautiful appearance. It is produced according to GMP standards. The connection of pipe fittings adopts international standard quick-connection connection, which is convenient for disassembly and cleaning.
Titanium rod filter is a filter made of titanium powder sintered filter element, which is generally used for coarse filtration or intermediate filtration. This filter element has the advantages of high precision, high temperature resistance, corrosion resistance and high mechanical strength. It is widely used in the pharmaceutical industry. The shell material is 316L or 304 stainless steel. Comply with GMP standard.
Precautions for the use of titanium rod filters
1 Avoid scratches, collisions, dust and oil.
2 Its working pressure should not exceed the rated working pressure during use.
3 In normal use, there is at least 3-5 minutes of low-pressure start-up time, and the relative pressure difference should be controlled below 0.5Mpa, and then the working pressure should be gradually adjusted to normal needs (the maximum pressure does not exceed 0.4Mpa).
4 After a certain period of operation, the pressure may increase due to the blockage of the filter element, resulting in a decrease in pressure and flow, which requires backflushing or backwashing regeneration. Regeneration cycle depends on rated pressure and flow
Titanium rod filter cleaning method:
After the titanium rod filter element is used for a period of time, it will be blocked to a certain extent, the flow rate will decrease, and the pressure at the front end of the filter will increase. There are the following:
1. For the newly used filter element, generally use the method of clean water backflushing and gas backflushing to clean, that is, use clean water slightly larger than the working pressure (such as; 0.3mPa) to inject water in the opposite direction. The recoil time is about 1 to 3 minutes.
2. When the filtration effect does not rebound significantly after multiple backwashing, it can be soaked in a hydrochloric acid solution below 5%, a sulfuric acid solution below 8%, or a NaOH solution below 10% at room temperature, and then rinsed with water.
The specific choice to use acid washing or alkali washing should be selected according to the impurity in the filtrate being easily soluble in acid or alkali.
Main performance of titanium rod filter
1. Good airtightness, compact structure, not easy to damage. It is suitable for the harsh working conditions on the production site, and there is no maintenance cost;
2. There is no problem of adsorption loss for filtration solution, adsorbent and catalyst, and does not change the original composition of the working medium;
3. Non-toxic, non-magnetic, non-shedding, good biological compatibility, because of this performance, titanium rod filters are widely used in the pharmaceutical industry, food and beverage industry;
4. Small footprint, high temperature resistance, and good oxidation resistance, suitable for high-temperature precision filtration of various acid-base salts and various organic solvents;
5. It is easy to disassemble and assemble, and the filter structure is scientific and diverse, which can meet various filtration requirements;
6. High filtration precision, which can filter particles above 0.2 microns at one time
Soter titanium rod filter serves the vast number of pharmaceutical, food and chemical factories, please contact us if you need:
Ministry of International Trade
Contact: Jennyxiang
Tel: 0086-577-86997177
Fax: 0086-577-86998122
Mobile: 0086-18605777765/15988773719
Email: alice@suotechina.com